Pelco Camera Lens 13FF12D User Manual

®
Installation/Operation  
Camclosure® Lens Packs  
C1971M-D (1/03)  
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com  
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150  
International Customers: Tel +1 (559) 292-1981 or FAX +1 (559) 348-1120  
Color Camera  
When replacing a lens on a color camera, change  
the lens mount and lens.  
REMOVE LENS  
MOUNT & LENS  
UNSCREW  
1. Unscrew the two Phillips screws on the  
sides of the lens mount. Do not discard  
the screws as you will need them to  
secure the new mount. Lift and remove  
the lens mount and lens.  
UNSCREW  
2. The new lens mount and lens are shipped  
unassembled. Mount the lens onto the lens  
mount by carefully threading it clockwise.  
MOUNT LENS  
(CLOCKWISE)  
3. Install the new lens mount assembly. Secure it  
with the two Phillips screws previously removed  
in step 1.  
DO NOT OVER-  
TIGHTEN SET  
SCREW  
4. Remove the dust cover from the lens.  
ADJUST LENS  
(CLOCKWISE)  
REMOVE  
DUST  
COVER  
5. Lens Adjustment – Turn the lens clock-  
wise/counterclockwise until the picture on  
the monitor is in focus. Carefully tighten  
the set screw. Do not over-tighten.  
ICS200 SERIES  
Camera Installation (ICS200  
and ICS300 Series Only)  
To prevent damage to the camera or lens of  
an ICS200 or ICS300 Series Camclosure  
integrated camera system, the camera must  
be installed in the proper hole of the mount-  
ing bracket. If the camera is not installed in  
the correct hole, the window of the enclosure  
may be forced against the lens.  
ICS300 SERIES  
Refer to the illustrations for which mounting  
hole to use to install the camera.  
Pelco Manual C1971M-D (1/03)  
[ 3 ]  
SPECIFICATIONS  
Focal Length  
Format Size  
Relative Aperture (F)  
Iris  
Horizontal Angle of View  
2.9 mm  
1/3-inch  
2.0  
Fixed  
90°  
3.6 mm  
1/3-inch  
2.0  
Fixed  
74°  
6 mm  
1/3-inch  
1.8  
Fixed  
42°  
8 mm  
1/3-inch  
2.5  
Fixed  
32°  
12 mm  
1/3-inch  
2.5  
Fixed  
21°  
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of  
shipment.  
Exceptions to this warranty are as noted below:  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and  
MC3651H-2X camera models, which have a five-year warranty.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed dome products.  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and EnduraSeries distributed network-based video  
products.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight  
prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this  
warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s  
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products  
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state  
to state.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and  
provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization  
number (CA number if returned for credit, and RA number if returned for repair).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate  
address below.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco. ©Copyright 2003, Pelco. All rights reserved.  
REVISION HISTORY  
Manual #  
C1971M  
C1971M-A  
C1971M-B  
Date  
3/00  
4/00  
7/00  
Comments  
Original version.  
Revised specifications.  
Revised manual to include all series of Camclosure integrated camera systems.  
Revised specifications.  
Added 3.6 mm lens.  
C1971M-C  
C1971M-D  
3/02  
1/03  
Added camera installation instructions for ICS200 and ICS300 Series.  

QSC Audio Car Amplifier CXD43 User Manual
Profile Car Speaker BX10 User Manual
Panasonic PALMCORDER IQ PV A396 User Manual
Nikon SB 600 User Manual
Nikon Coolpix S3100 User Manual
NAD Blu ray Disc Player T557 User Manual
MB QUART RSD 213 User Manual
Leica SBC RU 430 User Manual
Lanzar Car Audio SD51N User Manual
LaCie 319 User Manual